The L.C. Smith Collectors Association
[
Message Archive
|
The L.C. Smith Collectors Association
]
Re: barrel breech jeweling
Archived Message
Posted by bill on July 16, 2017, 6:34 pm, in reply to "
Re: barrel breech jeweling
"
True jeweling is done with a small wire brush in a drill press and valve grinding compound. The barrels are roughly off square by 1.5 degrees as is the standing breach.
bill
Message Thread:
barrel breech jeweling
-
bryan
July 16, 2017, 3:19 pm
Re: barrel breech jeweling
-
David Williamson
July 16, 2017, 4:15 pm
Re: barrel breech jeweling
-
bill
July 16, 2017, 6:34 pm
Re: barrel breech jeweling
-
Will Favre
July 18, 2017, 8:50 pm
Re: barrel breech jeweling
-
bill
July 19, 2017, 7:12 pm
Re: barrel breech jeweling
-
Dan
July 19, 2017, 11:23 pm
Searching