The L.C. Smith Collectors Association
[ Message Archive | The L.C. Smith Collectors Association ]

    Re: Extractors problem Archived Message

    Posted by David W on September 29, 2008, 7:17 am, in reply to "Extractors problem"

    Jim,
    If you look closely on the barrel lug you will see a 1/8" pin next to the joint check, knock it out with a drift pin and slowly turn the joint check and it will come out, there is a spring in there also.




    As far as buying the part, I kind of doubt it, it would have to be made, but as you can see the spring is what pushes on the cam to operate the extractor upon breakling the gun. There also could be a residue from powder, grim in this area and in the extractor guide hole, clean these areas with a q-tip with solvent.
    Good luck and let us know how you make out.

    Message Thread: