Diesel Diagnostics

Post a Response

Iveco Daily 2.3 2000 - Starts OK, then idle rises - Fixed #

Posted by Job Gevers on September 12, 2019, 7:57 pm

Year of Manufacture: 2000
Engine Size and Code: 2.3

Hi all,

I have this old Iveco with a problem that it starts ok but after a few seconds the idle rises to around 2K.
I have found the K/L lines on the 38 pin diagnostic plug (Mercedes fits but pin designation is completely different.) and it sort of communicates on EDC15/16 but I can't get any live data.

Does anyone know which machine can be used for one of these?

Or can anyone give some inspiration as I can't think why it would raise the idle speed.

Cheers,

Job

Re: Iveco Daily

Posted by Ian Baxter <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1560' width='330' height='300' border=0 style='border:none;'> on September 13, 2019, 8:25 am, in reply to "Iveco Daily"
Ian Baxter

Hello Job,
Texa Truck or car should be able to work on this.

But will need the correct cable or the pins probing which the Texa tool ilistraits on the tools screen when selecting the vehicle.

Hth
Ian

Re: Iveco Daily

Posted by Peter Keverne <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2835' width='330' height='300' border=0 style='border:none;'> on September 15, 2019, 9:13 am, in reply to "Iveco Daily"
Peter Keverne

Hi Job
Technomotor will do this with no problem if it has the correct cables with it.

Peter

Re: Iveco Daily

Posted by Job Gevers <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5524' width='330' height='300' border=0 style='border:none;'> on September 15, 2019, 3:54 pm, in reply to "Re: Iveco Daily"

Thanks guys, I'll see if I can find someone with these tools as I have neither...

Fixed #

Posted by Job Gevers on September 18, 2019, 6:59 pm, in reply to "Iveco Daily"
Edited by board administrator September 26, 2019, 1:58 pm

With my home made plug I was able finally to communicate with the Launch under Iveco EDC16.

It was really simple, the alternator was charging at around 11.6 volt, whatever the revs. Couldn't be bothered to find the correct parts to repair so installed a Bosch exchange alternator and idle was back to normal.

Thanks guys for the replies!

« Back to index

[ Diesel Diagnostics ]