Diesel Diagnostics

Post a Response

Vauxhall Vivaro 2.0 dci 90 M9R780 2007 - Do the injectors need coding? #

Posted by Colin Hedger on January 30, 2019, 8:16 am

Year of Manufacture: 2007
Engine Size and Code: 2.0 dci

Hi
I've fitted 4 new injectors to this vehicle. Can anyone confirm if the injectors need coding or not please? There is nothing in Launch for this.
If so, should I look in Renault/Nissan? Do they all call number 1 the timing chain end? will it start/run without coding (so I can move it into the workshop - it bloody freezing outside!)
Thanks a lot.

Colin.

Re: Vauxhall vivaro 2.0 dci 90 M9R780

Posted by Mick Partington User icon on January 30, 2019, 7:07 pm, in reply to "Vauxhall vivaro 2.0 dci 90 M9R780"
Michael Partington

Look under renault and #1 is gearbox end, you could always unplug the #1 and see if fault code matches

Re: Vauxhall vivaro 2.0 dci 90 M9R780

Posted by Colin Hedger User icon on January 31, 2019, 1:59 pm, in reply to "Re: Vauxhall vivaro 2.0 dci 90 M9R780"
Colin Hedger

Thanks Mick. I'll try Renault when I have time, I take it these are coded then? will it run without coding just so I can move it?

Re: Vauxhall vivaro 2.0 dci 90 M9R780

Posted by Peter Warman User icon on January 31, 2019, 2:53 pm, in reply to "Re: Vauxhall vivaro 2.0 dci 90 M9R780"

Hi Colin

I would say they need coding, the code should be on top of the injector

I have G-Scan, Snap On and Autocom. I have checked and both the Snap On with 18.4 and Autocom will code the injectors (if you can find someone with one of these)

I will run without coding but probably very rough (if at all)

Peter

Re: Vauxhall vivaro 2.0 dci 90 M9R780

Posted by keith geach User icon on February 10, 2019, 4:48 pm, in reply to "Re: Vauxhall vivaro 2.0 dci 90 M9R780"
Keith Geach

If new or good quality injectors (ie not factors) then it will run.

« Index

[ Diesel Diagnostics ]