Diesel Diagnostics

Post a Response

Ford Transit 2.4 2011 - PCM calibration code #

Posted by Colin Cooper on March 3, 2017, 9:13 pm

Year of Manufacture *: 2011
Engine Size and Code *: 2.4
( Optional ) Scanner Used: Ford ids

I've been called to this job via another garage, long story short they have purchased a new PCM due to the old one being water damaged.
The new PCM comes new with no programme installed, and the garage don't have the old pcm to get any info from.
Does anyone know where I can get the calibration file number? I have access to Ford Etis and my ids is genuine but I've never come across this problem before?

Obviously I have the pcm part number but IDS is asking for the calibration file number or tear number.

Can anyone help me please?, I'm willing to send chassis no via PM if needed.

Kind regards

Re: Ford transit PCM calibration code

Posted by Chris Angus <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat5111' width='330' height='300' border=0 style='border:none;'> on March 4, 2017, 10:37 am, in reply to " Ford transit PCM calibration code"

If i remember right you can find the code in the session log data, in the bottom left corner, it normally shows the first and last parts you need

Re: Ford transit PCM calibration code

Posted by Tony Ludford <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5539' width='330' height='300' border=0 style='border:none;'> on March 4, 2017, 3:33 pm, in reply to " Ford transit PCM calibration code"
Tony Ludford

Have you checked the drivers door shut, above the striker post. It's normally there.

Re: Ford transit PCM calibration code

Posted by Simon Forsey <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5231' width='330' height='300' border=0 style='border:none;'> on April 1, 2017, 9:02 pm, in reply to "Re: Ford transit PCM calibration code"

Hi

All the information should be on the PCM sticker. These can be awkward, on some it only requires the tear number to be entered.

A word of caution, I've had incorrect PCMs supplied by for and you just go round and round in circles

Good luck

Simon

« Back to index

[ Diesel Diagnostics ]