Diesel Diagnostics

Post a Response

Ford Mondeo 2.0 TXBA 2001 - Glow plug module #

Posted by Peter Lomas on April 25, 2016, 2:46 pm

Year of Manufacture *: 2011
Engine Size and Code *: 2.0 TXBA
( Optional ) Scanner Used: IDS
( Optional) Fault Codes: Non

Hi All
WFOEXXGBBEBT55800 2.0 tdci eng code TXBA 2011
We require some pin data info, Autodata has a wiring diagram
We would like to know what we should see on the white/orange wire
and the Brown/Violet wire (this has battery v at the moment}
at the heater plug control unit,The glow plug light dose not show on the dash
we assume the plugs should work ign on ? No fault codes in IDS
Checked resistance on plugs & we live & earth to unit
Regards Peter

Re: ford Mondeo glow plug module

Posted by andrew young <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5148' width='330' height='300' border=0 style='border:none;'> on April 25, 2016, 5:45 pm, in reply to "ford Mondeo glow plug module"
Andrew Young

What is the actual fault with the car?

Re: ford Mondeo glow plug module

Posted by Peter lomas <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5466' width='330' height='300' border=0 style='border:none;'> on April 26, 2016, 1:11 pm, in reply to "Re: ford Mondeo glow plug module"
Peter Lomas

Hi Andrew
First start up ( when cold)
idle very lumpy, cuts out, diesel knock
Glow plugs not operating, we thought they assisted with smooth running.
Regards Peter
Ps Spill off check on injectors seems ok

« Back to index

[ Diesel Diagnostics ]