Diesel Diagnostics

Post a Response

Nissan Qashqai 1.5 dCi 2009 - Injector programming #

Posted by John Hall on April 7, 2015, 9:53 pm

Year of Manufacture *: 2009
Engine Size and Code *: 1500 Dci

What are folks using to programme injectors on these cars please as I have tried Bosch KTS (does not give options to input code just clears old one), Carmen Scan (Does not list injector codes), Delphi DS150 (Listed but wont communicate properly - contacted Tech help - No - your right it wont work !!), Hella Megamac 42 (Only communicate with "old" system and injector coding only available on "new" system).

Any help appreciated ?

Re: Nissan Qashqai

Posted by Shane gray <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3442' width='330' height='300' border=0 style='border:none;'> on April 8, 2015, 8:11 am, in reply to "Nissan Qashqai"
Shane Gray

Hi John,
last one I did I left the coding out.
customer said it runs fine.
shane

Re: Nissan Qashqai

Posted by Glyn Morgan <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2543' width='330' height='300' border=0 style='border:none;'> on April 11, 2015, 4:54 pm, in reply to "Re: Nissan Qashqai"
Glyn Morgan

Hi John,

I recently carried out this procedure successfully with Autocom, I know there are some differences between Delphi and Autocom but was led to believe the Delphi had newer features enabled sooner

Regards

Glyn

Re: Nissan Qashqai

Posted by Anthony Pickering <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3715' width='330' height='300' border=0 style='border:none;'> on April 11, 2015, 9:31 pm, in reply to "Re: Nissan Qashqai"

Unsure if injector coding is possible but i did a forced regen on a qashqai few weeks back using Autologic Renault, megane 3 if i recall correctly. Had no issues.

Would not fully recommend it but I do like to try different things.

Re: Nissan Qashqai

Posted by Terry taylor <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5336' width='330' height='300' border=0 style='border:none;'> on April 12, 2015, 1:37 pm, in reply to "Re: Nissan Qashqai"
Terry Taylor

Hi john we have a qashqai in at the moment with code p1089"pump"that's the only description G-Scan gives you,we phoned auto vista and spoke to one of the techs very nice bloke who went on to nissans web site and downloaded nissans description of diagnostic fault tree which was a complete waste of time,he also wanted to know if G-Scan had the injector programme in the menus and no it doesn't,we have a test bench and test a lot injectors and have found out that most injectors will run rough at first but then settles down and run ok maybe around 50 to 100 miles,hope this helps terry

Re: Nissan Qashqai

Posted by Andy Stephenson <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3615' width='330' height='300' border=0 style='border:none;'> on April 15, 2015, 10:10 pm, in reply to "Nissan Qashqai"
Andy Stephenson

The LAUNCH software lists injector coding for the Qashqai but I have not done any using it ! however I have done a Clio 1500dci with it if that helps

Re: Nissan Qashqai

Posted by John hall <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3023' width='330' height='300' border=0 style='border:none;'> on April 15, 2015, 10:56 pm, in reply to "Re: Nissan Qashqai"

Many thanks folks, have sent it out running ok to "bed in" itself and will recheck shortly.

Terry , I think it was Charles at Blue Print you spoke to, I was talking to him at the same time via email asking about the G-Scan, he said he had someone working on one with a fault code issue and would ask them about injectors

Many thanks to you all yet again

« Back to index

[ Diesel Diagnostics ]