Diesel Diagnostics

Post a Response

Landrover Discovery 3.0D 2010 - Codes P006a, P1247 & P0235 restricted performance - Fixed #

Posted by Piotr Sokolowski on April 27, 2014, 6:03 pm

Year of Manufacture *: 2010
Engine Size and Code *: 3.0 diesel
( Optional ) ECU Type: bosch edc17
( Optional ) Scanner Used: dec, kts

hello
Disco 4 2010 3.0 diesel car goes to limp mode. Fault codes P006A mass or volume air flow circuit malfunction P00BD mass or volume air flow circuit malfunction P1247 boost pressure control low pressure level P0235 turbocharger boost press sensor A improper operatioon.
Did any of you guys come across something similar? Not that easy to see anything physically on this one. Maybe someone would drop some ideas. many thanks

Re: disco4 P006a P00BD P1247 P0235 restricted performance

Posted by Ian Slattery <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1196' width='330' height='300' border=0 style='border:none;'> on April 27, 2014, 8:18 pm, in reply to "disco4 P006a P00BD P1247 P0235 restricted performance"
Ian Slattery

Hi Piotr

Take a look at fixed and gone. Jag xf think it is the same engine.

Regards Ian.

Re: disco4 P006a P00BD P1247 P0235 restricted performance

Posted by Mark Lamont <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2555' width='330' height='300' border=0 style='border:none;'> on April 28, 2014, 8:03 am, in reply to "disco4 P006a P00BD P1247 P0235 restricted performance"
Mark Lamont

I think this is going to be a common problem with these twin turbo engines. I had a RR sport with the same problem, remove osf wheel and wheel arch liner, there is a large bypass valve just behind the radiator with electrical and vacuum connections. The linkage from the diaphragm seizes up, I took mine off to check it all but you may not need to. Freeze frame shows one maf reading high and the other virtually nothing.

Fixed #

Posted by Piotr Sokolowski on April 28, 2014, 11:44 am, in reply to "Re: disco4 P006a P00BD P1247 P0235 restricted performance"
Edited by board administrator May 1, 2014, 8:59 am

all sorted now. many tahnks for your help guys. It was taht flap stuck open.

« Back to index

[ Diesel Diagnostics ]