Posted by Pete Mutlow on February 4, 2014, 7:44 pm
Year of Manufacture *: All Years Engine Size and Code *: All ( Optional ) ECU Type: All ( Optional ) Scanner Used: Any
Evening All,
This just a general enquiry. I had the opportunity to code the 4 injectors on a Ford Focus 1.8 TDCI today and all went well, taking particular note of the programming sequence. The codes were scribbled down by the customer (2nd hand injectors) and as I was entering the codes, it occurred to me that the letter O could be misconstrued for the number 0. Is there a way of distinguishing the two? Normally, I would take the codes directly from the package box and this potential mix-up has not entered my mind before. I would be interested in the answer for future reference.
Posted by Peter Mutlow on February 5, 2014, 5:18 pm, in reply to "Re: Ford Injector Programming" Edited by board administrator February 10, 2014, 3:24 pm
Thanks both for that useful information. Something else learnt today...
on February 4, 2014, 8:18 pm, in reply to "