Nissan Qashqai 1.5 dCi K9K 2009 - Code P0381 glow control system #
Posted by Simon Palmer on January 23, 2014, 3:25 pm
Year of Manufacture *: 2009 Engine Size and Code *: 1.5 dci (k9k) ( Optional) Fault Codes: p0381 glow control system
Hi
I was wondering if anyone could help i have a 1.5 dci nissan in that will NOT START it had 2 faults in the memory one being p0381 glow control system i have tested we have supply to the glow plugs and we know 3 of 4 glow plugs are good, the other code was cam position sensor we had no signal, replaced the sensor now we have a good signal and the code has gone. I have checked the timing all good but engine may sound different when cranking. we know the glow plugs are not fully necessary to start the vehicle but this is the only code left.
Any suggestions would be appreciated.
Re: Nissan Qashqai
Posted by aidan birley on January 23, 2014, 6:31 pm, in reply to "Nissan Qashqai" Aidan Birley
Simon
Live data ??
Aidan
Re: Nissan Qashqai
Posted by Steve Shaw on January 23, 2014, 10:23 pm, in reply to "Nissan Qashqai" Steve Shaw
is the engine cranking fast enough? does your scanner display cam/crank sync. status?
Steve
Re: Nissan Qashqai
Posted by Mark Carter on January 23, 2014, 10:34 pm, in reply to "Re: Nissan Qashqai" Mark Carter
Hi Simon,
Question, will it fire on a squirt?
MarkModern cars, Its all wizardry and witchcraft
Re: Nissan Qashqai
Posted by SIMON PALMER on January 24, 2014, 4:30 pm, in reply to "Re: Nissan Qashqai" Simon Palmer
Hi Mark will try a sqirt later. Adrin mentioned live data we can see it has rail pressure, engine becomes syncronised within a few turns of the engine. Thanks. Simon
on January 23, 2014, 6:31 pm, in reply to "