Diesel Diagnostics

Post a Response

Peugeot Boxer 2.2 2007 - Injector coding help required #

Posted by Richard Endean on December 7, 2013, 2:40 pm

Year of Manufacture *: 2007
Engine Size and Code *: 2.2 4HV
( Optional ) ECU Type: edc dcu102
( Optional ) Scanner Used: KTS

After much searching of the interweb I found an Australian website telling me that I can read a QR code from a new injector to enable me to code it. Fine, except I can't read the code. I mailed a pic from my phone to pc then uploaded it to various decoding websites and they all say no QR code found. Can anyone help/advise? Are the numbers on the shaft of the injector - below the part number - any use?

TIA
Dick

Re: Peugeot Boxer 2.2 Injector coding help required

Posted by Mark Carter <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on December 7, 2013, 5:18 pm, in reply to "Peugeot Boxer 2.2 Injector coding help required"
Mark Carter

The QR code is normally used by the VM on the production line.

What type of code are you looking for?

how many numbers are used in the codes already programed into the ECU?

What make is the system?

Mark

Modern cars, Its all wizardry and witchcraft

Re: Peugeot Boxer 2.2 Injector coding help required

Posted by RICHARD ENDEAN <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2939' width='330' height='300' border=0 style='border:none;'> on December 7, 2013, 10:49 pm, in reply to "Re: Peugeot Boxer 2.2 Injector coding help required"
Richard Endean

It's a Denso system and IIRC the codes the KTS pulls out are 15 or 16 digit Hex. Had same problem with this engine on a Transit using DEC SS3.

I found a pdf on a foreign Denso site which shows a guy scanning the code and getting a longer number to put into the ecu.

Will try to find a link - at home now..

Re: Peugeot Boxer 2.2 Injector coding help required

Posted by Richard Endean <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2939' width='330' height='300' border=0 style='border:none;'> on December 7, 2013, 11:05 pm, in reply to "Re: Peugeot Boxer 2.2 Injector coding help required"
Richard Endean

Found it..http://www.rjtweb.net/DENSO/newsletters2013/2013_Technical%20Service%20Bulletin_no%2004_EN.pdf

Looks like I was wrong about the number of digits. The numbers in the screenshot on page 2 look very much like the ones I'm expecting.

Re: Peugeot Boxer 2.2 Injector coding help required

Posted by Richard Endean <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2939' width='330' height='300' border=0 style='border:none;'> on December 9, 2013, 9:38 am, in reply to "Re: Peugeot Boxer 2.2 Injector coding help required"
Richard Endean

Sorted - I think!

There are numbers etched into the plastic underneath where the electrical plug slides on. Torch and magnifying glass needed!

« Back to index

[ Diesel Diagnostics ]