Diesel Diagnostics

Post a Response

Peugeot 307 1.6 HDi 9HZ 2006 - Non start, code for camshaft sensor - Fixed #

Posted by Shane Gray on March 25, 2013, 5:28 pm

Year of Manufacture *: 2006
Engine Size and Code *: 1.6hdi 9hz
( Optional ) Scanner Used: mac tools

Hi,
Got this one in as none start. Fault code for camshaft sensor. Tryed looking at live data but when you try and crank it the diagnostic scanner loses connection.
At camshaft sensor I have nothing at pin 1, 12v at pin 2, good earth at pin 3. Pin 1 should be 5volts. Is this correct? .
I also scoped at sensor and I have no pattern.
Seems I lost reference volts. Will test back at ecu tomorrow.
Any advice please?
Shane

Re: peugeot 307- non start

Posted by george ambelas <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3245' width='330' height='300' border=0 style='border:none;'> on March 25, 2013, 8:50 pm, in reply to "peugeot 307- non start"
George Ambelas

your cps signal output is from the brown wire and it's 12v as shown from the snip coming from a 307 9hz

Fixed #

Posted by Shane Gray on March 26, 2013, 6:54 pm, in reply to "Re: peugeot 307- non start"
Edited by board administrator March 31, 2013, 1:23 pm

Hi again,
Thanks George for pattern . I had lost ecu 5volts supply which there is a short loom from cam sensor to main loom and behind main loom connector there was a broken wire which had rubbed on egr pipe. Soldered in new wire bypassing connector and all good.
Shane

« Back to index

[ Diesel Diagnostics ]