Range Rover 3.6 TD V8 2008 - MIL on, codes P010A & P0480 - Fixed #
Posted by John Hancock on March 8, 2013, 3:45 pm
Year of Manufacture *: 2008 Engine Size and Code *: 3.6L TDV8 ( Optional ) Scanner Used: AD/KTS ( Optional) Fault Codes: P010A PO480
Hi all
This came in a couple of weeks ago engine light on, codes p010e mass air flow b. quick look around air mass meters rear meter connection wasn't clipped in properly cleared codes ok. back today with codes p010A p0480. These don't clear. Swapped meters around and fault stays on b which is the rear air flow meter, so i suspect wiring fault to meter, also with code p0480 which is fan 1 control.
I was wondering if any one as a wiring diagram. or as come across this before i suspect rubbed wiring somewhere down by the rad. Not sure what the voltages should be at both meters.
Thanks john.
Re: range rover L322
Posted by Mark Carter on March 8, 2013, 7:06 pm, in reply to "range rover L322" Mark Carter
KTS should have the wiring diagrams you need.
Failing that phone the help line and they should be able to send them to you.
MarkModern cars, Its all wizardry and witchcraft
Fixed #
Posted by John Hancock on March 16, 2013, 2:10 pm, in reply to "Re: range rover L322" Edited by board administrator March 18, 2013, 1:40 pm
Thanks for the reply couldn't get the complete wiring diagram sent through but enough info. traced fault to chaffed and corroded wire in loom. but seperate locations. thanks john
on March 8, 2013, 7:06 pm, in reply to "