Audi A6 3.0 TDi 2008 - Replacing plastic inlet manifold flap and motor units #
Posted by Keith Brown on February 28, 2013, 7:47 pm Hi
|
Re: audi a6 3ltr tdi manifold runner replacment
Posted by Ian Baxter
|
on February 28, 2013, 11:00 pm, in reply to "
The only really fiddley bit from memory was the little metal coolant bi-pass pipes get in the way and prevent removal of manifold but if you loosen, but don't remove the banjo bolts ( unless you have 10 way reversable fingers ) you can manipulate to metal pipes enough to remove manifolds. On refitting and before bolting down make sure the flaps are free to move and not pinched. These don't need any adaptations just clear codes. 
Re: audi a6 3ltr tdi manifold runner replacment
Posted by keith brown
|