Diesel Diagnostics

Post a Response

Vauxhall Combo C Z13DT 2006 - Non start #

Posted by Jeff Henderson on July 31, 2012, 4:48 pm

Year of Manufacture *: 2006
Engine Size and Code *: Z1.3dt
( Optional ) Scanner Used: Dec
( Optional) Fault Codes: U2103/u2104 / u2105/u2108

Hi, non runner no spanner light and comms with bsi only to read above dtcs but won't erase them , checked continuity on v line to bsi from data plug ok, and continuity on can wires between abs and Ecu and bsi all ok , I think I have a unit fault but unsure how to pinpoint which one of the three , can I meter the wires to get a ohms reading to diagnose this ? Thanks regards Jeff

Re: Vauxhall combo c- non start

Posted by Tony Bickers <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5143' width='330' height='300' border=0 style='border:none;'> on July 31, 2012, 4:51 pm, in reply to "Vauxhall combo c- non start "
Tony Bickers

This is'nt the model with poor cluster connection causing non start/comms issues is it?

Re: Vauxhall combo c- non start

Posted by Jeff Henderson on July 31, 2012, 6:03 pm, in reply to "Re: Vauxhall combo c- non start "
Message modified by board administrator August 2, 2012, 4:13 pm

No Tony this has a plug onto the clocks not like the fixed mount type.

Re: Vauxhall combo c- non start

Posted by Shane gray <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3442' width='330' height='300' border=0 style='border:none;'> on August 2, 2012, 9:34 pm, in reply to "Re: Vauxhall combo c- non start "

Hi tony,
I have a corsa c with simailer issue. What is the fix for poor cluster connection? Is there a mod kit from vauxhall?
Thanks shane

Re: Vauxhall Combo C Z13DT 2006 - Non start #

Posted by Darren Cotton on August 6, 2012, 10:12 pm, in reply to "Vauxhall Combo C Z13DT 2006 - Non start #"
Message modified by board administrator August 9, 2012, 1:35 pm

When you say "BSI" Do you mean BCM?

Are you saying you have no comms with IPC and ECU?

Darren

« Back to index

[ Diesel Diagnostics ]