Diesel Diagnostics

Post a Response

Peugeot Partner 1.9D - Wiring schematic needed #

Posted by Lee Hemmings on May 12, 2012, 8:59 pm

Year of Manufacture *: 2000
Engine Size and Code *: 1.9 d
( Optional ) Scanner Used: delphi ds150 and scope
( Optional) Fault Codes: p0102,p0170,p0380,p1146

Here i have the above that i can only run on easy start, the fault codes relate to maf, fuel trim,glow plug circuit,and needle lift consistency. Now i started with the maf fault code and when i attempted to scope it, discovered i couldet as the 5 v ref was absent at the plug,so i went onto autodata and discovered that there was no wiring schematic for the above vehicle. I think that this van as a wiring issue which is causing numerous circuits to fail... therefore i am after a wiring diagram for this if anyone as one, or any other information that could be useful to me.
Many thanks Lee

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Kevin Apps <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on May 12, 2012, 9:31 pm, in reply to "Peugeot partner 1.9d, wiring schematic needed."
Kevin Apps

Lee

I may have a schematic, but would need an engine number.
or better still

http://public.servicebox.peugeot.com

pay per view.

Kev.

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by lee hemmings <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3416' width='330' height='300' border=0 style='border:none;'> on May 12, 2012, 9:51 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Lee Hemmings

Hi kevin, i am going back in work tomorrow morning so will get the engine number off it and post it up thank you.
What is the link you posted, never seen that before ?

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Kevin Apps <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 12:06 am, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Kevin Apps

Lee.

You only need to look around the UKAT forums to find it and others.
Did you use the UKAT search facility before you posted this thread ?

Kev.

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by lee hemmings <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3416' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 10:38 am, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Lee Hemmings

Hi Kevin, no i did not use the search function at first, but i just have this morning and it comes up 'no message' after typing peugeot partrner 1.9d wiring schematic ??
In the garage now, the engine code appears to be absent from the block where i thought it was.
I have reg and chassis numbers and know its a m49 model code !

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Paul Howd on May 13, 2012, 12:04 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Message modified by board administrator May 16, 2012, 2:32 pm

Re Search!

You have my sympathy, I have never been able to work out the precise cabalistic incantations required to access information using search either! Its a bit like trying to check a words spelling in a dictionary (You can only find the word if you already know how to spell it)

Forum Search

Posted by Peter Warman <iframe src='https://members.boardhost.com/ukautotalk8/info/user=Peter+Warman' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 12:32 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Peter Warman - Administrator

Hi Lads

For searches the best method is to just type in the vehicle ie: "Peugeot Partner" "Renault Clio" etc. This will then bring up a list of those vehicles in the ongoing forums and archives

You can then scan down the list to view a post with a similar problem or code

We edit (clean up) every post and put the full vehicle details into the heading and a short description plus mark as "Fixed#" (when fixed). This makes it easier to find what you may be looking for. NO other forum host does this, this is why you will see your post "modified by administrator", we are cleaning up your incomplete heading descriptions

HTH

Peter

PS: Please remember to search in the relevant forum ie Diesel vehicle faults in the Diesel forum

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Kevin Apps <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 1:05 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Kevin Apps

Lee

Follow Peter,s advice and i,m sure lots of help will come up, not a schematic, but help all the same.
As for the eng. code it is part of the chassis number, don,t you have a VRM look up !

Time spent reading and useing the forum,s is time well spent.

Kev.

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Peter Warman <iframe src='https://members.boardhost.com/ukautotalk8/info/user=Peter+Warman' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 1:10 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Peter Warman - Administrator

Hi Lee

If you have the registration I can check on AutoVista as it has VESA for some Peugeot Partner 1.9D models (not all)

VESA = (Vivid Electronic Smart Assistant) this shows you diagrams on how to pin out ECU components (test)

Peter

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by lee hemmings <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3416' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 4:46 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Lee Hemmings

Hi Peter yes reg is x979 fwp and chassis is vf35bwjyf60349796 (just in case it helps you)
Any info you can get me on this car will help, if possible a complete wiring schematic of the engine electronics would be ideal.
Thanks very much

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Mark Carter <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 4:59 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Mark Carter

Hi Lee,

>>> so i went onto autodata and discovered that there was no wiring schematic for the above vehicle <<<

Yes it does, What version are you running?

Mark

Modern cars, Its all wizardry and witchcraft

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Kevin Apps <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 6:30 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Kevin Apps

Lee

As i posted above Engine code is part of ch. no.
in your case WJY.

If you really want a full schematic use the link posted i posted earlier.

Just looked and Mark is correct (not that he,s often wrong

Hi mark)wiring diag is on Autodata
Kev.

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by lee hemmings <iframe src='https://members.boardhost.com/ukautotalk8/info/user=ukat3416' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 7:16 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Lee Hemmings

Well my fault i put in WJZ as engine code and it shows no data for wiring. With the correct engine code very kindly pointed out by kevin (thanks bud), i get the wiring schematic. Just goes to show use the info CORRECTLY you have at hand.
I will carry on with this problem tomorrow and see were i can find these missing 5 volts.

Re: Peugeot partner 1.9d, wiring schematic needed.

Posted by Mark Carter <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on May 13, 2012, 9:32 pm, in reply to "Re: Peugeot partner 1.9d, wiring schematic needed."
Mark Carter

Lee,
Before you get carried away with the wiring diagram side of things, what low fuel pressure tests have been carried out and what were the results?

Mark

Modern cars, Its all wizardry and witchcraft

« Back to index

[ Diesel Diagnostics ]