Toyota RAV4 2.0 2004 - Code P0200 injection circuit open - Fixed #
Posted by Brad Kingsley on February 24, 2012, 9:28 pm
Year of Manufacture *: 2004 Engine Size and Code *: 2.0 ( Optional ) ECU Type: denso system ( Optional ) Scanner Used: solus pro ( Optional) Fault Codes: p0200 injector circuit /open
My boss got this from auction last week, looks a great car with full s/h low milage in great clean condition straight from main dealer.
Anyway he drove it home and it ran great, (10 miles)parked it in the garage and i took it out and put it on the forecourt the next morning.
3 days later(this morning) he took a lady on test drive with it. 3 miles out of town it cut out. It restarted but wasnt running great eml came on.
He got it back and i plugged scanner in to find p0200 injector circuit /open.
freeze frame was 70oc coolent,1070 rpm
Anyway car runs fine when first started but as it gets warm it will run slightly rought for a second or two before stopping. revs high or low.
i have stripped down wiring,checked connectors and done wiggle test to no avail. It doesnt look like its been in pieces and all wiring appears original and untampered.
Im thinking the injector module is at fault.
Any ideas welcome
Re: toyota rav 4
Posted by Piotr Sokolowski on February 25, 2012, 9:10 pm, in reply to "toyota rav 4"
hi I repalced one of this injector module some time ago on avensis 2006 d4d for the same issue .P0100. Black box beetwen ecu and injectors
Fixed #
Posted by Brad Kingsley on March 1, 2012, 8:43 pm, in reply to "Re: toyota rav 4" Message modified by board administrator March 7, 2012, 2:30 pm
Got new injector module and fault was still the same. Found loose earth on engine, flashing enough to start it but occasionally loosing contact stopping engine.