Diesel Diagnostics

Post a Response

Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #

Posted by Raymond Ferreday on February 18, 2011, 1:23 pm

Year of Manufacture *: 57
Engine Size and Code *: 1.3 z13dtj
( Optional ) ECU Type: multijet 6jo/602
( Optional ) Scanner Used: tech 2

Hi

Had a garage replace a injector and have asked me to recode that injector in! but when I ask tech 2 to replace injector it goes through to page that does the 100% run through then it ask for the ingition to be switch on, then it says reset failed! great tryed diconnecting battery, tryed with & without candis module any ideas not done this before I am i doing something wrong.

Ray 01827 311332

Re: Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #

Posted by john wardrobe <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5342' width='330' height='300' border=0 style='border:none;'> on February 18, 2011, 9:33 pm, in reply to "Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #"
John Wardrobe

Hi, could it be as simple as using the letter O instead of the number zero, been there myself.
cheers john

Re: Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #

Posted by Dave Hill <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT2783' width='330' height='300' border=0 style='border:none;'> on February 20, 2011, 1:56 pm, in reply to "Re: Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #"

Ray

Is there an option on the tool to recode all the injectors in one operation, rather than a single injector only?

Re: Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #

Posted by ray ferreday <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5108' width='330' height='300' border=0 style='border:none;'> on February 21, 2011, 3:55 pm, in reply to "Re: Vauxhall Corsa 1.3 Z13 DTJ 2007 Combi Van - Recoding a new injector #"
Raymond Ferreday

dave I belive there is but canot get to that page as the reset failure is as far as i can get. I have not got to the page where i can put in the ijector no in .ray

« Back to index

[ Diesel Diagnostics ]