Morning, got fault code p2002 particulate filter bank 1 malfunction, engine will not rev over 3,000 rpm and code can not be cleared.dpf sensor is fixed at -1 and disconecting it does nothing,have checked operation and it appears to work and have tried a new one,i think it may need a reset or regeneration but i can not make it get hot enough on the sensors on and around turbo and filter,does anyone have any ideas of the problem i am having or a better understanding of how system works....help. i have solus,kts,vag com,carmen scan light and dec.is there a area in vag com to force a regen ?. many thanks george.

what pressure differential you have on the dpf sensor?. There should be a option on vcds, definitely on vcp+k is OCF function for dpf regeneration.
look at this
http://wiki.ross-tech.com/wiki/index.php/18434/P2002/008194

hi piotr, the pressure sensor was -1 fixed, i have blown down the pipes and had it running to check pipes were clear, put a new sensor on and a soon as i moved the vehicle it started to rev ok.?? can only assume pressure sensor was fault but would not reconise it until movement??????, pluged in vag com, set it for regen which made temp sensor go up to 600 degres drove round until ash % was nil. fixed !
back to sunday, where is that wife and is my dinner ready ha ha.

ok have a good sunday's dinner.