Back to Forum |
Post a Response |
Chrysler 300C 3.0 V6 2008 - Swirl motor problem #
Posted by Carl Ford on July 19, 2010, 10:45 am just a quick question have my mates 300c in and replaced the swirl valve motor as it was not working and was contaminated with oil which was leaking from the turbo, my question is that the fault code does not clear so i am assuming that it must need coding/reseting on a dealer tool with this being a Mercedes engine will the merc tool do the job as i have a friend with AL but don't fancy wasting an hour drive if it isn`t going to work.
|
Re: Chrysler 300C swirl motor problem
Posted by Aidan Birley on July 19, 2010, 1:43 pm, in reply to "Chrysler 300C swirl motor problem"
|
Re: Chrysler 300C swirl motor problem
Posted by Carl Ford on July 20, 2010, 12:21 pm, in reply to "Re: Chrysler 300C swirl motor problem"
|
Re: Chrysler 300C swirl motor problem
Posted by Aidan Birley on July 20, 2010, 1:36 pm, in reply to "Re: Chrysler 300C swirl motor problem"
|
Re: Chrysler 300C swirl motor problem
Posted by Carl Ford on July 20, 2010, 4:16 pm, in reply to "Re: Chrysler 300C swirl motor problem"
|