Diesel Diagnostics

Post a Response

Ford Transit 2.0 Di 2005 - Fault code P1342 - Fixed #

Posted by Bryan Smith on January 30, 2010, 1:50 pm

Year of Manufacture *: 2005
Engine Code or CC *: 2.0 di
( Optional ) Scanner Used: Snap-On Solus Pro

Hi all

Have the above vehicle with intermittant high idle speed and very intermittant total loss of throttle control. I have code P1342 which Solus says is pedal demand sensor A circuit range or performance. I have checked the TPS and all readings are correct according to Autodata but the vehicle has been behaving itself whilst in my workshop. I have also 'googled' this code with very little luck so I am assuming that its not a common problem. I have had to let the owner have it back for work and will be trying again next Friday. Any ideas would be much appreciated.
regards, Bryan

Re: Ford Transit 2.0 Di 2005 - Fault code P1342 #

Posted by Mark Carter <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on January 30, 2010, 3:06 pm, in reply to "Ford Transit 2.0 Di 2005 - Fault code P1342 #"

do these not suffer with water getting into the pedal module? HTH

Regards Mark.

Modern cars, Its all wizardry and witchcraft

Re: Ford Transit 2.0 Di 2005 - Fault code P1342 #

Posted by Bryan Smith <iframe src='https://members.boardhost.com/ukautotalk8/info/user=UKAT5330' width='330' height='300' border=0 style='border:none;'> on February 1, 2010, 4:46 pm, in reply to "Re: Ford Transit 2.0 Di 2005 - Fault code P1342 #"
Bryan Smith

Thanks Mark,
Water would make sense as it's an intermittant fault. I think I will have to just replace it and see. Ford tell me they sell quite a few so maybe thats a clue. Will post results.
Bryan.

Fixed #

Posted by Bryan Smith on February 8, 2010, 5:42 pm, in reply to "Ford Transit 2.0 Di 2005 - Fault code P1342 #"
Message modified by board administrator February 9, 2010, 6:46 pm

New pedal assy incorporating the TPS sorted this.

« Back to index

[ Diesel Diagnostics ]