Puegeot 307 2.0HDi RHY 2002 - Non start after battery fitted #Archived Message
Posted by Paul Foster on September 24, 2009, 12:10 pm
Hi All.
Job referred by RAC. Vehicle driven to workshop but battery not accepting charge. Customer reports that vehicle has been very difficult to start from cold - sometimes taking 5 or 6 attempts. Battery changed and now it won't start at all!
Fault codes listed are:
P0340 - Cam/crank synch
P1446 - Additive level
P1448 - Particulate filter blocked?
All the codes clear but P0340 comes back up while cranking.
Live data shows 295 - 300 bar pressure on crank.
Both crank and cam sensors checked at ECU. Earths also checked.
I suspect an ECU issue but I'd appreciate any suggestions.