- Re: Audi A6 2.7 TDi BPP 2005 - Turbo actuator basic setting # Archived Message
- Audi A6 2.7 TDi BPP 2005 - Turbo actuator basic setting # - Jamie Lambert June 25, 2009, 8:04 am
Posted by jamie lambert
on August 9, 2009, 10:31 pm, in reply to "Audi A6 2.7 TDi BPP 2005 - Turbo actuator basic setting #"
|
Hi all Thank you to Keith for e-mailing the procedure to perform the basic setting. The garage owns this car so thats why ist been a long time. Tried to perform the basic setting but the actuator wasnt moving and it didnt work. They then checked the live and earth's which were good so they decided to replace the actuator. Tried the basic setting again but no go, they then said that the ECM had been re-mapped. So they put original map back and tried the basic setting again but again no joy. I have also tried an actuator test and that doesnt move the actuator. Will the actuator be controlled with a pulse width signal, if so should i beable to actuate it with VCDS and see if ive got a signal at the turbo actuator? Any help would be most appreciated. Kind regards Jamie |
| Message Thread:
|