Back to Forum
Post a Response
    nissan micra 2005 1.5 dci Archived Message

    Posted by HADRIAN GARRETT on June 25, 2008, 6:51 pm

    hi this is a non runner with a p0608 code ive scoped the crank sensor which has a signal but only on 1 wire it a 2 wire sensor there is no voltage ive scoped the cam sensor seems ok scan tool live data shows 2000 bar fuel pressure but scope the pressure sensor and a different reading at first i thought i had 4 volt 4 volt and earth which made sense of the live data but on more testing i think ive got with ign on 0.4 volt 4 volt and earth and the 0.4 volt goes up on cranking to 3 volts ish and ive checked the leak of pipes and there is no fuel coming out on cranking .also there is no trigger to the injectors icant find any data on this it is a Renault engine in a Nissan any ideas

    Message Thread:


Copyright © uk autotalk