- Re: Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start Archived Message
- Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start - george brockis February 25, 2008, 10:57 pm
- Re: Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start - Steve Kefford February 26, 2008, 5:05 pm
- Re: Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start - george brockis February 26, 2008, 9:55 pm
- Re: Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start - Steve Kefford February 26, 2008, 5:05 pm
Posted by Steve Kefford
on February 27, 2008, 3:20 pm, in reply to "Re: Renault clio 1.5 dci 2002 delphi lvcr ,poor cold start"
|
George I use Autocom CDP Pro and in live data it shows the code assigned to each injector, the code for each injector is printed on the injectors themselves, 16 digits if I remember rightly. I should have mentioned that the air in the lines on the one I dealt with was mainly in the return lines although the leak off pipes and T pieces tested fine under pressure and vacuum and like I say the car runs perfectly. Saying all that your problem doesn,t sound injector related but more to do with the cold start stratergy, the heater plugs are controled by a timer which also holds them on for a short time after start, but for how long I'm not sure, it's near the fuel filter,7 spade square plug, part no: 7700115078. Would be worth testing to see if the plugs are being held on after cold start for a short period. Hope this helps Steve |
| Message Thread:
|