Back to Forum

Post a Response

LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter Archived Message Posted by Peter Rainsley on January 20, 2008, 4:32 pm No crank, no go, no comms (Multiscan, ACR4), no PATS blink codes, just constant LED flashing. This minibus is a local garage's hire vehicle. The above just about sums it up. They have tried jump leads and towing to no effect. The 'local' LDV dealer, 30 miles away, have suggested a new engine ecu @ £750, but admit they are not really sure. I have ecu pin-out for equivalent Transit, but no wiring diagram for the PATS unit, assuming it is a separate unit, and if so, where is it hidden. It has a blue chip key. I suspect either the transceiver unit is not picking up the key code and/or is not transmitting it to the PATS unit, which must be live as the LED is flashing. Does anyone have a wiring diagram for the system so I can check lives and earths, and test procedures. Is it just key to engine ecu that is programmable, or are transceiver and PATS unit also, or are these generic. Sorry for the long post, but I have tried not to get involved with this problem, but the garage is too big a customer to ignore, Peter Message Thread: LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter - Peter Rainsley January 20, 2008, 4:32 pm Re: LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter - Tony Sefton January 20, 2008, 6:13 pm Re: LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter - Tony Ludford January 20, 2008, 6:35 pm Re: LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter - Peter Rainsley January 21, 2008, 8:24 am Re: LDV Convoy, '54 plate, 2.4 Duratorque DI Non-starter - JON OTTER January 22, 2008, 1:22 pm