Back to Forum
Post a Response
Re: Citroen Berlingo / 2005 / 1.9D
Archived Message
Posted by Darren Bamford
on January 9, 2008, 9:13 pm, in reply to "
Citreon Berlingo / 2005 / 1.9D
"
Hi Brian
you should have swapped the pumps over when you had the engines out, much easier.
The pump module is matched to the engine ecu and the engine ecu is matched to the BSI.
The problem is the Pump module is a Fit once unit. It cannot be matched again to another ECU.
The choices are:
swap the pumps over
remove pump module and fit a new unit and match it to engine ecu.
or leave the pump on and remove the module and fit a standard stop/start solenoid and use the ignition feed in the 3 pin plug by the module.
The security cage can be a bugger to get off.
HTH
Darren...........
Message Thread:
Citreon Berlingo / 2005 / 1.9D
-
Brian Dewart
January 9, 2008, 12:40 am
Re: Citreon Berlingo / 2005 / 1.9D
-
Kevin Apps
January 9, 2008, 7:00 pm
Re: Citroen Berlingo / 2005 / 1.9D
-
Darren Bamford
January 9, 2008, 9:13 pm
Copyright © uk autotalk