Re: Mercedes Sprinter 311 2.2 CDi, 2001, Bosch EDC15C6 Archived Message
Posted by UKAT5245 on May 21, 2007, 11:04 am, in reply to "Mercedes Sprinter 311 2.2 CDi, 2001, Bosch EDC15C6"
Hi peter I Have had several like your's i would remove the wiring loom from the engine back to the ecu which is under the dash next to bonnet release. disconnect the three plugs (2 in ecu & 1 other) push through bulkhead. Disconnect plug from glowplug timer unit disconnect all other plugs in the loom 'remove top part of plastic manifold unplug under injector cover then you can pull the loom through the manifold upwards it's the only way. Then check the wiring for the injectors it rubs through down near the starter any problems give me a call 07768363545 Kev Gundry
|
|