Re: Peugeot 307 2.0 HDI, Siemens RHY, NON-Start reg. 01 Archived Message
Posted by Richard Endean on March 2, 2007, 11:42 pm, in reply to "Peugeot 307 2.0 HDI, Siemens RHY, NON-Start reg. 01"
I wouldn't panic unduly over a few bits of metal as most hdi's seem to have some. Check cranking rail pressure - should be around 250bar within 5 seconds. Bear in mind that the siemens hp pumps are only available from dealer - approx £575! I would check everything else first. By the way, the lp pump is in the front of the hp pump - don't take the tank apart looking - you wouldn't be the first. HTH Richard
|
|