on January 9, 2019, 7:26 pm, in reply to "Re: VW Crafter CR30 Turbo postion Actuator P256300"
Have you checked the basic settings of turbo actuator ?
I have these readings, for an older 2 ltr VAG but not your engine code, so cant be certain they are correct
Engine Group 120, (Or DVM on sensor wire) should be reading between 3.4 & 3.9V no vacuum .
Using a Mityvac, vac the unit up to max correct reading in Group 120 (or DVM) is 0.76V if not adjust turbo rod
When this is set there is a basic setting to carry out to store the readings
Aidan
Message Thread VW Crafter CR30 2015 - Turbo position Actuator P256300 # - Martin Rogers January 8, 2019, 1:38 pm
« Back to index | View thread »