Re: seat
Posted by Matt Booth
on April 21, 2016, 8:42 pm, in reply to "
seat"
Edited by ukat3028 on April 21, 2016, 8:48 pm
Have you tested the fuel shut off valve on the pump? Can't remember how accessible it is but you can either check for a feed to it, activate it on VCDS or check for a feed at pin 8. 9 and 10 are for the 'commencement of injection valve'. Feed on 10 and earthed by 9. Also, check for a feed at pin 4 of the intake manifold flap as this is the same feed used for the metering adjuster and would explain both codes Matt
|
Message Thread
Seat Inca 1.9 AYQ 2004 - Code P1563 quantity adjuster lower limit - Fixed # - Trevor Kelleher April 21, 2016, 7:54 pm
- Re: seat - Matt Booth April 21, 2016, 8:42 pm
- Re: seat - Trevor Kelleher April 22, 2016, 8:28 pm
- Re: seat - tony bickers April 21, 2016, 10:22 pm
- Re: seat - Trevor Kelleher April 22, 2016, 8:32 pm
- Re: seat - tony bickers April 22, 2016, 9:29 pm
- Re: seat - Matt Booth April 23, 2016, 2:23 am
- Re: seat - Trevor Kelleher April 23, 2016, 10:31 am
- Re: seat - Trevor Kelleher June 2, 2016, 11:32 pm
- Re: seat - Alan Lange June 3, 2016, 8:33 pm
- Re: seat - andrew pethig April 22, 2016, 8:48 pm
- Fixed # - Trevor kelleher May 24, 2017, 9:59 pm
« Back to index | View thread » |