Renault Scenic 1.9 Dci
With KTS P1122 accelerator pedal position sensor 1/2 interrelationship.
Autologic gives P180B(B0) D073 Track 2 Pedal sensor Circuit : coherence between track 1 and track 2.

Wiring tests good and the pedal sensor ( remote on the n/s inner wing )has been replaced.

Interesting it is a permanent code but clears when on full throttle.

Scoping the two signals at full throttle track 1 is 50% of track 2 although lower down the range it goes out of line.
I guess it can really only be an ECU fault but wondered if anyone had any further tests I may have missed

[img][/img]