Edited by ukat3033 on May 16, 2014, 9:03 am
KOEO plugged in 0.37v
KOEO unplugged 3.35v
On cranking this morning the volts go up to around 3v, so the rail pressure is not being controlled.
This system has a sensor in the rail and an IMV on the pump, I cant see why the pressure isnt being regulated.
The pump has been tested and function confirmed as good.
Also this is bosch EDC 16 with cp3 pump.
I'm told this is very unusual for this age however vauxhall do say its correct.
Liam.
Message Thread 
Vauxhall Vivaro 2.0 M9R.780 2011 - Non start, code DF896 - Fixed # - Liam Hall May 13, 2014, 8:20 pm
« Back to index | View thread »
on May 16, 2014, 9:01 am, in reply to "