Ford Connect 1.8 2012 - Code P269D-F1 #
Posted by Kevin Gundry on May 6, 2014, 9:04 am
Edited by board administrator May 8, 2014, 3:38 pm
Year of Manufacture *: 2012 Engine Size and Code *: 1800 RWPD stage 5 emissions ( Optional ) Scanner Used: IDS ( Optional) Fault Codes: P269D-F1
Hi Guys, i have got a bit of a head scratcher here, i keep getting this code P269D-F1 but can't find any decent info on this, only generic such glow plug after treatment circuit low. I have tried to do a forced regen which was unsuccessful at the first attempt, so i checked for a voltage at the dpf glow plug, i had voltage but no current so established that the glow plug in the vaporiser unit was burnt out. I have replaced this vaporizer unit (£180 for a bit of pipe and a glowplug ) i can now carry out a regen successfully, however the code will not clear and the eml light comes back on after a few miles. There does not appear to be any useful info on how the system works on ids or what other components are envolved, i have replaced the glowplug vaporizer unit and i have swapped the differential pressure sensor from another vehicle, any ideas? Yours hopefully Kev Gundry
|