Hi,
Had this Kia in as non start, first thing is my scanner will only read it through obd, so no codes and no live data.
Checked fuel supply and bleed, scoped FPS on turn over and getting 0.7volts with spray of aero start( no I shouldn't but did) getting over 2 volts so pressure ok?
Checked injector wire voltage getting 2.7 volts (should it be 12volts delphi injectors?) checked pulse from injector with my noids no pulse, checked current with picoscope no current. So next I scoped crank sensor which was ok, then cam no signal so checked live and ground and signal volts ok so replaced sensor. Still no start!
Quick check on timing belt tension and seems ok.
Any help please?
Will get it on a better scanner tomorrow hopefully .
Shane