Ford Mondeo 2.0 CDi (Delphi) 2004 - Hard to start cold #
Posted by John Corrigan on January 19, 2011, 6:32 pm
Message modified by board administrator January 21, 2011, 3:19 pm
Year of Manufacture *: 2004 Engine Size and Code *: 2.0 Ltr CDi ( Optional ) ECU Type: Delphi ( Optional ) Scanner Used: Autodiagnose ( Optional) Fault Codes: Non
Having problems with a Ford Mondeo CDi 2.0Ltr 2004 with Delphi fuel system. Some times it is hard to start cold, stops on the road,and engine misfire.Checked back leak on injectors and two injectors were reading high, had 4 injectors reconditioned by local Delphi agent.Refitted injectors and recoded, started ok. , Following morning would not start, rail pressure ok, no faults, started on a tow but misfire still present. checked compression 310/400 bar,fitted new heater plugs, cleaned out inlet manifold,[a lot of carbon around the valves in head ]Still no joy, my local Delphi agent supplied a replacement set of injectors,Car no better. Have had problems with Delphi injectors on Ford Mondeos & Tnansits before . Any ideas. John
|