Re: Ford mondeo 2.0tdci hesitation 2500 rpm
Andrew Small
The Injectors i had tested were from the original engine, the cylinder head was reused but another short engine supplied, maybe different pistons ?? or the injectors were wrong in the first place, my local delphi test center says there are two different length nozzles and if the short ones are fitted it wont run but they are not sure if you put the long ones in place of short, i will try to find the correct part number for the vehicle first, the Tdc sensor is new and the installation procedure followed & checked, ford tis says to push tdc sensor till it touches the tooth on the flywheel and the airgap is now set due to small plastic pip on the end of the sensor? thanks for posts still trying to sort it out. Andy
|