Year of Manufacture *: 2003
Engine Code or CC *: F6JA
( Optional ) ECU Type: SIEMENS SID 802
( Optional ) Scanner Used: SNAP-ON / FORD IDS
Hi,Members This 1 came in from another shop with no start condition. First,I tried to connect my scan tool(SNAP ON)with the latest SW for European cars - and I saw that the PATS light flash very fast and than slowly and with the PCM
I couldn't make any connection - by the way with the other systems like ABS,AIRBAG I succeed it ! This type of PCM is from SIEMENS SID 802 FORD P/N 2S6A-12A650-BK. I understood that the IMMOB' system is part of the IC - to find such a
PCM it is very diffcult - because I need to try the all parts like : PCM,IC,SWITH WITH KEY and etc'... First I'd be happy to know if someone can say that the main problem was with the IC and not with the PCM and if it possible to
"kill" the IMMOB' and to open the way direct to PCM and to help the engine to start... Second,how I have to make the
correct tests for the CAN BUS LINES - as I wrote got DTC U1262 CAN BUS COMMUNICATION FAULT,I found the lines between the PCM and IC in a good condition...but I think it is not enough. Thanks for any good advices - Benzi
Message Thread
« Back to index | View thread »