Year of Manufacture *: 2007 on
Engine Size and Code *: 2.0 TDCI
I have a customer with two of these one is '07 and the other is '08. Both had ABS lights on and both codes relating to front abs sensor circuit "A" open circuit or short to ground.
Both of them had a break in the wiring about three inches before the loom reached the plug to the short loom to the sensor, behind the under wing cover.A quick soldering and insulation job later and all is well.
I can only presume it is caused by the manufacturing process because the break was in the same place in the loom but one was o/s and the other n/s
HTH Allan
Message Thread
« Back to index | View thread »
Copyright © uk autotalk