vehicle arrived from another garage with fault, all runs perfectly until clutch pedal was depressed even 2-3mm, then all throttle response was lost eml lit and codes logged, (Both driver demand codes.) 93, 95.
Checked operation of clutch switch,this worked opening and closing circuit on ohms tester, seemed to be working well.
As the switch works on a 12v feed and is only two wire we bridged it to trick system in case of fault, vehicle will now rev with clutch depressed, unfortunatly switch is on back order so car has left wth extra scotchlok! Not sure why it tested and passed while definatly faulty!
Phrom Fill