Year of Manufacture *: 2005
Engine Size and Code *: 2.7 TD6
( Optional ) Scanner Used: Dec SS2
( Optional) Fault Codes: U0101
Replaced clutch and flywheel. While gearbox was out I checked all electrical connections(all OK).
Cleared fault codes. U0101 lost communication with transmission control module was back in the EPB module.
There is a manual reset for the gearbox xy sensor which cures this fault. Drive the vehicle in reverse gear until R shows in the display then do the same in first until 1 shows. Do the same for all forward gears. Your foot must be completely off the clutch pedal for the gear number to be displayed. Turn off engine and remove key for 10 seconds. This all has to be done in one ignition key cycle. The EPB light should be out now.
Hope this helps someone.
Message Thread
« Back to index | View thread »
Copyright © uk autotalk