The planed magnifier system could look like in the Tesla Patent:1,119,732 Dec1914 best regards and thank´s for your short time.
thank you for your answer.
At this time my main problem is,
I have to wind the extra coil(TC),because the weather is good.
The extra coil should have dimensions:
12,44"diam.x 58.17"length 1025 turns closewound AWG16 ohms
or can I also use:
12.44"diam.x61"length 1075 turns closewound AWG16 13.5ohms
(I would prefer this)
two stage toroid (one elevated) planed
Could I use so many turns for an effective extra Coil !
The other construction data´s are not calculated exactly.
53.1" diameter 3mm spacing 24.2"length AWG16 142turns ~30.5mH ~2000ft wire
You wrote that 3mm will not be sufficent.
But if I have a greater distance,say 5mm I need for same Inductance
more wire and more turns.
53.1" diam. 5mm spacing 42"length 168 turns!! 30.5mH 2330ft wire.
More turns in driver means more voltage stress.How could
this stress minimized?
Why caculate magsim L2=30.5mH and the design formular and don´t give turns-ratios?
The sec./driver wire should be welded in Polyetylene and possibly filled with oil.On the top winding should be a Toroid.
59"diam 0.47"copper-tubing 1.06"spacing 10turns 15.7"high helical
Above the top winding should be an isolated rim.
The planed power is around 10KVA.
« Back to index | View thread »
The planed magnifier system could look like in the Tesla Patent:1,119,732 Dec1914
best regards and thank´s for your short time.