"...(I've) almost finished the 1945 version of the Pennsylvania:
...this...picture...is a closer view of the (mid-)section (than in the final pic, below)...show(ing particularly well) the twin 5" mounts:

Click on Image to Enlarge...the(se) twin 5" turrets (as at left) are almost done except for the gun barrels & the slots for those barrels on the face of the turrets. These turrets are made from sandwiched sheet plastic & carved to shape. (For the) 5"/38cal barrels...haven't decided on what to do about the barrels yet...(but) i might use 1/350 5"25cal barrels...(of) machined brass not plastic.
(Note also) the deck winch(es above at right, and one in the following) which is not complete sitting between the deck edge & the 2 (aft) 14" turrets:

Click on Image to Enlarge (For this) 1945 version of the Pennsylvania (also) i need...quad(- 40mm)s..."
Click on Image to Enlarge