--Originally Posted 11/18/12--

Here, despite substantial remaining questions about the sail, and (much less so) the top casing - both of which I will check/correct, against actual historic reference pics - is the best of what we are able to merge together, so far:


Click on Image for FULL-RESThe linked pic ("S3class350scale_PLANSfu.JPG") - not the above, but the "FULL-RES" one it links to - contains a scale-bar (numbered in inches) and embedded dpi, sized for exactly 1:350 scale (the one best served by our smaller conversion options - and which I've accordingly decided to target, myself). So, at exactly the (132.258) dpi - or, "pixels/inch" - it specifies, you should be able to print out directly at 350-scale (in "landscape" orientation, fitting onto one standard-sized page). Which you can verify/ensure, by comparing with a ruler directly on the printout scale bar.

I deleted the scale-bar from the (lower-resolution) pic above, to avoid possible confusion.

If printing-out in landscape mode (90-degree rotation) may present a problem,try THIS
Of course, you can print out any of thea above at any scale desired - if you know the desired length, in inches, of the S(3) you want to build - and simply adjust the printout drawing until it matches that length (which I made sure to post, in the discussions of each option, and scales).

Again, I will (eventually) be posting more/better - but in the meantime, the above should be enough to (at least) get you started!


Cheers,

-Matty