The L.C. Smith Collectors Association

The L.C. Smith Collectors Association
[ The L.C. Smith Collectors Association ]

20/28 16 gauge load data

Posted by John Pulis on August 25, 2022, 7:46 am

I seem to remember that someone posted 16 load recipe using 20/28 powder, RST hulls, and was it Gulandi or DR 16 wads. If so could some one direct me to that posting. I look back about a year or so but found nothing.

Thanks

Re: 20/28 16 gauge load data

Posted by Charlie Brooks on August 25, 2022, 9:16 am, in reply to "20/28 16 gauge load data"

John,2028 has worked very well for me in the short shells.Win 209 primer,17.2 grains 2028,BP Trap Commander wad,1oz shot.In my test 8800 psi,1200FPS.This is one of my best liked loads.If you have any questions,feel free to call me at 410-756-2095.Good luck.Charlie PS,20 grains of the new 572 works well also.

Re: 20/28 16 gauge load data

Posted by John Pulis on August 26, 2022, 7:37 am, in reply to "Re: 20/28 16 gauge load data"

Thanks Charlie.

Re: 20/28 16 gauge load data

Posted by Steve Arnett on September 5, 2022, 1:16 pm, in reply to "Re: 20/28 16 gauge load data"

John, if you want a softer load, I have been using 14.5 gr. of American Select, 7/8 oz. shot, W-W 209 and BP SP 16 wad in the 2 1/2" RST hulls. I don't have chronograph data, but has been very pleasant and effective in my No. 1 gr. 16 ga. 20/28 is a little too slow for 7/8 oz. In 16 ga.

Re: 20/28 16 gauge load data

Posted by John pulis on September 7, 2022, 7:48 am, in reply to "Re: 20/28 16 gauge load data"

Thanks Steve I,ll give that a try.

Re: 20/28 16 gauge load data

Posted by Bill Lader on October 5, 2022, 4:33 am, in reply to "Re: 20/28 16 gauge load data"

Steve would you say the same for 20 ga

« Back to index

724

[ The L.C. Smith Collectors Association ]