The L.C. Smith Collectors Association

The L.C. Smith Collectors Association
[ The L.C. Smith Collectors Association ]

New FAQ - The Hunter Arms' trigger plate assembly technique

Posted by Drew Hause on September 15, 2021, 11:12 am
Edited by board administrator September 15, 2021, 11:13 am

Courtesy of Jim DeMunck
"How did the gunsmiths at Hunter Arms assemble or replace the trigger plate after stock removal?"
in the Disassembly and Reassembly FAQ
https://lcsca.clubexpress.com/content.aspx?page_id=274&club_id=43784

Re: New FAQ - The Hunter Arms' trigger plate assembly technique

Posted by Tom Archer on September 15, 2021, 9:51 pm, in reply to "New FAQ - The Hunter Arms' trigger plate assembly technique"

Drew
This is the device I purchased at Deep River a few years ago that is designed to center the top lever post in the trigger plate.

Re: New FAQ - The Hunter Arms' trigger plate assembly technique

Posted by Drew Hause on September 16, 2021, 6:41 am, in reply to "Re: New FAQ - The Hunter Arms' trigger plate assembly technique"

Thanks Tom. I'll add that image, with your instructions from the DoubleGun thread to the FAQ.

640