The L.C. Smith Collectors Association

The L.C. Smith Collectors Association
[ The L.C. Smith Collectors Association ]

Trouble with an Ideal Grade

Posted by Charlie Brooks on February 23, 2021, 8:57 am
Edited by board administrator February 23, 2021, 1:07 pm

I have a very pretty Ideal Grade 12 gauge. It seem when I open the gun after pulling the triggers, on snap caps or not, it does not want to stay open. I have to force the barrels down to extract the spent shells and reload.
Other than this it shoots great! Can anyone tell me what's wrong?
Thanks!!

Re: Trouble with an Ideal Grade

Posted by David Williamson on February 23, 2021, 9:21 am, in reply to "TROUBLE WITH AN IDEAL GRADE 12 GAUGE"
Edited by board administrator February 23, 2021, 1:08 pm

Charlie it could be a few things. Make sure the cocking rods are not loose and are staked on the lifters tight.

The extractor activator could be worn.

You didn't say whether it has ejectors or not, but if so make sure the screws that hold the ejector springs are tight and not slipping on the rod. Also make sure the for-end screws are tight.

Re: Trouble with an Ideal Grade

Posted by CHARLIE BROOKS on February 23, 2021, 1:33 pm, in reply to "Re: Trouble with an Ideal Grade"

David thanks for the reply. I believe she only has extractors. I'll check everything you listed tonight and see what I can find.

Thanks again!

« Back to index

710

[ The L.C. Smith Collectors Association ]