Re: Reasembly Question
Posted by Bill May on February 17, 2020, 11:25 am, in reply to "Reasembly Question"
Prior to reassembly, you need to position the safety pivot link so the bottom "legs" are in contact with the highest point where it mates with the triggers. What I'm attempting to describe is essentially the "Safe" position. You'll have to pull the triggers down by hand in order to do this, because they are spring loaded. The safety slide should be in the "Safe" position. This allows the top pin in the pivot to properly align with the slot in the bottom of the safety slide. In your photo, it's not in the slot. The spring Mike mentioned appears to be okay. I hope this helps...