The L.C. Smith Collectors Association

The L.C. Smith Collectors Association
[ The L.C. Smith Collectors Association ]

Downside to fitting a second barrel set?

Posted by Travis Smith on September 17, 2019, 9:12 am

Any downside to taking a real nice 12 ga regular frame extractor field gun and fitting with a second set of ejector barrels and forearm? LC Smith of course.

I am assuming all the fitting will take place on the new barrel only and none on the receiver.

Thanks

Travis

Re: Downside to fitting a second barrel set?

Posted by David Williamson on September 17, 2019, 1:07 pm, in reply to "Downside to fitting a second barrel set?"

Travis, correct, no work on receiver it is all on the barrels. If you are using the same for-end, no work is done on for-end it is all done on the spare barrels. The only way to do it is to take the wood off the for-end and try attaching the metal and see where it is hitting.
Since you want to put an ejector set of barrels on with the for-end, the same, no work on receiver only on barrels and for-end.

Re: Downside to fitting a second barrel set?

Posted by Travis Smith on September 17, 2019, 8:36 pm, in reply to "Re: Downside to fitting a second barrel set?"

Thx David

« Back to index

1027

[ The L.C. Smith Collectors Association ]