The L.C. Smith Collectors Association

The L.C. Smith Collectors Association
[ The L.C. Smith Collectors Association ]

Barrel bottom rib question

Posted by Travis Smith on May 9, 2019, 7:34 pm

Is the bottom rib the same on a set of 30" 12 bore barrels as on a 30" 20 bore set?

Many thanks

Re: Barrel bottom rib question

Posted by David Williamson on May 10, 2019, 1:05 pm, in reply to "Barrel bottom rib question"

Travis from what I see in the drawings is that the bottom rib on both the FW frame and Regular frame are the same .295-.298. It doesn't specify gauge so they are the same.

Re: Barrel bottom rib question

Posted by Travis Smith on May 10, 2019, 1:34 pm, in reply to "Re: Barrel bottom rib question"

That is what I was thinking

I have a 30" FW ideal 20 Bore that I want to refinish that needs a bottom rib and I also have a set of Damascus 12 Bore barrels with a blow out but the bottom rib is good.

I was thinking of harvesting the good rib to put on the good barrels.

Thanks

Re: Barrel bottom rib question

Posted by David Williamson on May 10, 2019, 2:59 pm, in reply to "Re: Barrel bottom rib question"

Travis, just make sure you secure the barrels and the top rib with some wire along the whole length during the soldering.

Re: Barrel bottom rib question

Posted by Travis Smith on May 10, 2019, 3:58 pm, in reply to "Re: Barrel bottom rib question"

Thanks for the direction. I have been wanting to try a rib re-lay but I think I am going to just scavenge the rib and send to a professional on this ideal grade barrel set.

Re: Barrel bottom rib question

Posted by Mike Harris on May 10, 2019, 4:53 pm, in reply to "Re: Barrel bottom rib question"

Would not the Damascus barrel have a Damascus bottom rib? That should be interesting!!

ribs

Posted by Travis Smith on May 10, 2019, 5:40 pm, in reply to "Re: Barrel bottom rib question"

the bottom and top ribs do not appear to be Damascus. Just like the barrel extension and lug are not.

Re: ribs

Posted by Bill Schodlatz on May 10, 2019, 7:19 pm, in reply to "ribs"

A fellow by the name of Russ used to put the off side of his barrels in water so it would be hard to melt the wrong solder. I like soft wire and cut nails.

bill schodlatz

« Back to index

889

[ The L.C. Smith Collectors Association ]